Epson AL-M200 Series, Руководство пользователя

Страница: 184 / 232

5. Close the rear cover.
If the error is not resolved, there may be a piece of paper remaining inside the printer. Use the
following procedure to clear the jam.
6. Load a print media on the Paper Tray or PSI if there is no print media.
7. Press and hold ( Cancel Job ) button for more than three seconds.
The print media is fed to push out the jammed paper.
Clearing Paper Jams From the Center Output Tray
Important:
❏
To prevent electric shock, always turn off the printer and disconnect the power cord from the
grounded outlet before performing maintenance.
❏
To avoid burns, do not clear paper jams immediately after printing. The fusing unit becomes
extremely hot during use.
❏
Protect the OPC drum against bright light. If the rear cover is left open for more than three minutes,
print quality may deteriorate.
Note:
To resolve the error displayed on the LCD panel, you must clear all print media from the print media
path.
AL-M200 Series User’s Guide
Troubleshooting 184