manualshive.com logo in svg

Epson AL-M200 Series, Руководство пользователя, Страница: 175 / 232

Поделиться
Скачать
Epson AL-M200 Series Скачать руководство пользователя страница 175

❏

Keep print media stored in an acceptable environment.

❏

Do not remove the paper tray cover while printing is in progress.

❏

Ensure that all cables that connect to the printer are correctly attached.

❏

Overtightening the guides may cause jams.

See Also:

❏

“About Print Media” on page 100

❏

“Print Media Storage Guidelines” on page 102

❏

“Supported Print Media” on page 102

Identifying the Location of Paper Jams

!

Caution:

Do not attempt to remove a paper deeply jammed inside the product, particularly a paper wrapped
around the fusing unit or the heat roller. Otherwise, it may cause injuries or burns. Switch off the
product immediately and contact your local Epson representative.

Important:

Do not attempt to clear any jams using tools or instruments. This may permanently damage the printer.

AL-M200 Series     User’s Guide

Troubleshooting     

175

Содержание AL-M200 Series









































































































































































































































Отзывы:

Нет отзывов