Epson AcuLaser M7000 Series, Руководство пользователя

Страница: 93 / 199

Writing ROM P
This message indicates that a ROM module in the slot is being written. Please wait until this message
disappears.
Wrong Password
No print jobs have been saved with the password you entered.
Wrong Toner Cartridge
An inappropriate imaging cartridge is installed. Install only the imaging cartridge listed in
“Consumable products” on page 24.
See “Replacing Consumable Products” on page 116 for instructions on replacing the imaging
cartridge.
Printing and Deleting Reserve Job Data
Print jobs stored on the printer’s memory using the Re-Print Job, Verify Job, and Stored Job options of
the Reserve Job function can be printed and deleted using the control panel’s
Quick Print JobMenu .
Jobs saved using the Confidential Job option can be printed from the
ConfidentialJobMenu
. Follow
the instructions in this section.
Note:
The
RAM Disk
setting on the control panel must be set to
Normal
or
Maximum
to use the Reserve Job
function. We recommend installing optional memory to use this function. For instructions about
increasing your printer’s memory, see “Installing a memory module” on page 110.
Using the Quick Print Job Menu
Follow the steps below to print or delete Re-Print Job and Verify Job data.
1. Make sure the LCD panel displays Ready , then press the
r
Right button to access the control panel
menus.
2. Press the
d
Down button repeatedly until
Quick Print JobMenu
appears on the LCD panel,
then press the
r
Right button.
Epson AcuLaser M7000 Series User's Guide
Using the Control Panel 93