Epson AcuLaser M7000 Series, Руководство пользователя

Страница: 82 / 199

Password Config
Changes the password. Enter the old password first and then enter the new password twice.
To enter the password, press the
d
Down or
u
Up button to select the character and press the
r
Right
button to determine the character. After all characters are determined, press the OK button.
Note:
If you forget your password, contact your dealer. Note that when the password is initialized, the settings
and data stored on the printer are deleted. Depending on your environment, settings, such as network
connection settings, may need to be done again. We recommend making a note or backup of the
necessary data and setting information.
Limitation
Changes the restriction range. When
Interface
is selected, the password is required to change the
settings in the USB and Network menus. When
Config
is selected, the password is required to enter
Quick Print Job
or
Confidential Job
, or to change the settings in all menus. When
All
is
selected, the password is required to enter
Quick Print Job
or
Confidential Job
, or to change
the settings and to perform the items in all menus. Before changing the setting, you have to enter the
password set in the
Password Config
setting.
Energy Saver Menu
Item Settings (default in bold)
Time to Sleep 1 , 3, 5, 15, 30, 60, 120, 180, 240Min
Deep Sleep Mode
*1 *2 On, Off
Power Off Timer
On , Off
*3
Time to Off
*1 30, 60, 120, 180, 240, 360, 480 Min
Timer Setting Off , On
Start
*4 0:00... 8:00 ...23:59
Stop
*4 0:00... 18:00 ...23:59
Epson AcuLaser M7000 Series User's Guide
Using the Control Panel 82