Troubleshooting
108
The font on the printout is different from that on the screen
The printer fonts cannot be installed
The edges of texts and/or images are not smooth
The printer does not print normally via the USB interface
The AppleTalk zone setting is incorrect.
Open the
Printer Setup Utility
(Mac OS 10.3.x and 10.4.x) or
Print Center
(Mac OS 10.2), then select the AppleTalk zone
that the printer is connected to.
Cause
What to do
The PostScript screen fonts are not installed.
The PostScript screen fonts must be installed on the computer
that you are using. Otherwise, the font that you select is
substituted by some other font for display on the screen.
For Windows users only
The appropriate substitution fonts are not correctly
specified on the Device Settings sheet of the printer’s
Properties dialog box.
Specify the appropriate substitution fonts using the Font
Substitution Table.
Cause
What to do
The Emulation menu in the printer’s Control Panel is
not set to
PS3
for the interface that you are using.
Change the Emulation Menu setting to
PS3
for the interface
that you are using, then try reinstalling the printer fonts again.
For details about setting, see the Network Guide.
Cause
What to do
The Print Quality is set to
Fast
.
Change the Print Quality setting to
Fine
or
Maximum
.
The printer does not have sufficient memory.
Increase the printer memory.
Cause
What to do