Selecting From the Address Book
The speed dial destinations and group dial destinations registered on this machine are saved in the
address book. Follow the procedure described below to specify an address (e-mail address, FTP
address or SMB address) from the address book as the recipient of the scan data.
Note:
This feature is available only if data has been registered in the address book.
1. With the main screen or
Can Use AddressBook
displayed, press the
Addressbook
key four
times so that
ADDRESS BOOK
appears.
2. Press the
u
or
d
key to select
LIST
, and then press the
Select
key.
A list of the address book contents appears.
3. Press the
u
or
d
key to select the desired data, and then press the
Select
key.
4. Press the
Select
key again.
If an FTP address or an SMB address was selected, the destination address is specified.
5. If an e-mail address was selected, press the
u
or
d
key to select
FINISH
, and then press the
Select
key.
Note:
To add an additional e-mail address, select
ADD
in step 5, and then specify the destination. When
sending the data to an FTP address or SMB address, multiple addresses cannot be specified.
To check the specified e-mail address, select
CHECK/EDIT
in step 5. To delete an address, select
CHECK/EDIT
in step 5, and then continue with step 2 of "Deleting a Specified Destination Address".
Searching the Address Book
The destination address (e-mail address, FTP address or SMB address) where the scan data is to be sent
can be specified by searching the address book.
Note:
This feature is available only if data has been registered in the address book.
1. With the main screen (Scan mode) or
Can Use AddressBook
displayed, press the
Addressbook
key four times so that
ADDRESS BOOK
appears.
2. Press the
u
or
d
key to select
SEARCH
, and then press the
Select
key.
Epson AcuLaser CX37 Series Printer/Copier/Scanner User’s Guide
Using the Scanner
150