2. Use the keypad to type in the number (between 1 and 250) for the speed dial destination, and then
press the
Select
key.
The information registered for the speed dial destination appears for two seconds.
3. Press the
Select
key again.
If an FTP address or an SMB address was selected, the destination address is specified.
4. If an e-mail address was selected, press the
u
or
d
key to select
FINISH
, and then press the
Select
key.
Note:
To add an additional e-mail address, select
ADD
in step 4, and then specify the destination. When
sending the data to an FTP address or SMB address, multiple addresses cannot be specified.
To check the specified e-mail address, select
CHECK/EDIT
in step 4. To delete an address, select
CHECK/EDIT
in step 4, and then continue with step 2 of "Deleting a Specified Destination Address".
Selecting a Group Dial Destination
A maximum of 20 group dial destinations can be registered on this machine. (A maximum of 50 e-mail
addresses can be registered with one group.) Follow the procedure described below to specify e-mail
addresses from the registered group dial destinations as the recipient of the scan data.
Note:
❏
For details on registering e-mail addresses as group dial destinations, refer to “Registering Group
Dial Destinations” on page 160.
❏
A group dial destination containing a telephone number cannot be used in Scan mode.
1. With the main screen (Scan mode) or
Can Use AddressBook
displayed, press the
Addressbook
key three times so that
GROUP DIAL
appears.
2. Use the keypad to type in the number (between 1 and 20) for the group dial destination, and then
press the
Select
key.
The information registered for the group dial destination appears for two seconds.
3. Press the
Select
key again.
4. Press the
u
or
d
key to select
FINISH
, and then press the
Select
key.
Note:
To add an additional e-mail address, select
ADD
in step 4, and then specify the destination.
To check the specified e-mail address, select
CHECK/EDIT
in step 4. To delete an address, select
CHECK/EDIT
in step 4, and then continue with step 2 of "Deleting a Specified Destination Address".
Epson AcuLaser CX37 Series Printer/Copier/Scanner User’s Guide
Using the Scanner
149