Epson AcuLaser CX28 Series, Справочное руководство

Страница: 133 / 328

Printing With NetWare
111
For NetWare 4.x/5.x/6 Print Server Mode (NDS)
"
To use the Print Server mode, the IPX protocol must be loaded on the
NetWare server.
1
Log on to NetWare as an administrator from a client computer.
2
Start up NWadmin.
3
Select either the organization or organizational unit container that offers
the print service, and then click
Print Services Quick Setup (non-NDPS)
on the Tools menu.
4
Enter the appropriate names in the Printer Server Name, Printer Name,
Print Queue Name , and Print Queue Volume fields, select Other/
Unknown from the Printer Type field, and then click the [Create] button.
"
For queue user privileges, printer notification option, assignment of
multiple queues, and passwords, refer to the NetWare documentation,
and specify settings as necessary.
5
In Administrator mode of Web-based EpsonNet config, select NetWare
from the Network tab, and then specify the following settings.
–
NetWare Print: Select Enable .
–
Frame Type:
Select
Auto . (Select the frame type according to the network envi-
ronment.)
–
Mode: Select PServer .
–
Print Server Name: Specify the print server name created in step
4.
–
Print Server Password: Specify only when setting from the
NetWare server.
–
Print Queue Scan Rate: Specify 1. (Change as necessary.)
–
Bindery/NDS: Select NDS .
–
Preferred NDS Context Name:
Specify the name of the context that connects to Pserver.
–
Preferred NDS Tree Name:
Specify the name of the tree that Pserver logs on to.
6
Restart the printer (turn the printer off, then on again).
7
Use the NetWare server console to load MONITOR.NLM.
8
Select the connection information and, in the active connection column,
check that the created Pserver is connected.