Epson AcuLaser CX28 Series, Справочное руководство

Страница: 131 / 328

Printing With NetWare
109
–
Printer Number:
Specify the printer number (0-255). When 255 is specified, the set-
ting is
Auto .
8
Restart the printer (turn the printer off, then on again).
9
Use the NetWare server console to display the print server screen, and
then check that the created printer is shown as
Waiting for Job for the
connected printer (0).
For Print Server Mode With NetWare 4.x Bindery
Emulation
"
Before using bindery emulation, check that bindery emulation is com-
patible with the NetWare server.
1
From a client computer, log on with Supervisor permissions to access the
NetWare server where the Pserver is registered.
2
Start up Pconsole.
3
From the Available Options list, select Quick Setup , and then click the
[Enter] button.
4
Enter the appropriate names in the Printer Server Name, Printer Name,
Print Queue Name, and Print Queue Volume fields, select Other/
Unknown from the Printer type field, and then save the specified set-
tings.
5
Click the [Esc] button to quit Pconsole.
6
In Administrator mode of Web-based EpsonNet config, select NetWare
from the Network tab, and then specify the following settings.
–
NetWare Print: Select Enable .
–
Frame Type:
Select
Auto . (Select the frame type according to the network envi-
ronment.)
–
Mode: Select PServer .
–
Print Server Name:
Specify the print server name created in step 4.
–
Print Server Password:
Specify only when setting from the NetWare server.
–
Print Queue Scan Rate: Specify 1. (Change as necessary.)
–
Bindery/NDS: Select Bindery/NDS .
–
Preferred File Server:
Specify the name of the file server that connects to the Pserver.
7
Restart the printer (turn the printer off, then on again).