Epson AcuLaser C2000, Руководство администратора

Страница: 38 / 272

3-4
Settings for NetWare
Instructions for using NetWare
Printing a text file
When you print a text file using the NPRINT command of
NetWare or DOS, redirection, misconversion or a gap in
characters might occur depending on the client environment.
PCONSOLE limitation
To use the Internal Print Server in Print Server mode, you
cannot use the Print Server status display control with
PCONSOLE.
Bindery and NDS
❏
Bindery context path can be confirmed from the server
console by the SET BINDERY CONTEXT command.
❏
If the bindery context path has not been set, or if you want to
use the print environment of another context from a non-NDS
client, it is necessary to specify the context for the bindery.
Use the SET BINDERY CONTEXT command to set the context
in the AUTOEXEC.NCF file.
❏
You cannot use the bindery print server mode with EpsonNet
WinAssist if you are using Novell Client for Windows 95/98
version 3.00 or Novell Client for Windows NT version 4.50.
To configure the Internal Print Server for bindery mode, use
Novell IntranetWare Client or EpsonNet WebAssist.
See your NetWare 4.1x or NetWare 5 documentation for more
information.
IPX routing protocol "NLSP"
It is possible to select the IPX routing protocol “NLSP” from
NetWare 4.1x or later; however, the Internal Print Server does
not support NLSP. RIP/SAP controls the communication.