Epson Aculaser 2600 Series, Руководство пользователя

Страница: 399 / 473

Troubleshooting
399
11
11
11
11
11
11
11
11
11
11
11
11
The printer does not print normally via the
network interface
Cause What to do
The Data Format setting is different
from the data format setting
specified in the application (except
on Mac OS X) If the file is created in an application that
allows you to change the data format or
encoding, such as Photoshop, make sure
that the setting in the application
matches that in the printer driver.
The network connection is
something other than AppleTalk,
and the Data Format setting is not
set to ASCII data. If the network connection is something
other than AppleTalk, make sure that the
Data Format setting is set to ASCII data or
Tagged binary communications protocol
(Windows) or set to ASCII (Macintosh).
For Windows 2000 or NT 4.0 users
only
Job Management On is selected in
the printer’s Properties.
When AppleTalk is active and Job
Management ON is selected, the printer
does not print normally. Make sure to
clear the Job Management On check
box on the Job Settings sheet of the
printer’s Properties.
For Windows users only
The computer is connected to the
network using AppleTalk in a
Windows 2000/NT 4.0 environment,
and the Send CTRL+D Before Each
Job or Send CTRL+D After Each Job
setting on the Device Settings sheet
of the printer’s Properties dialog box
is set to Yes.
Make sure that both the Send CTRL+D
Before Each Job and Send CTRL+D After
Each Job settings are set to No.
For Windows users only
The print data is too large.
Click Advanced on the PostScript sheet of
the printer’s Properties, then change the
Data Format setting from ASCII data
(default) to Tagged binary
communications protocol.
For Windows users only
Printing cannot be performed using
the network interface.
Click Advanced on the PostScript sheet of
the printer’s Properties, then change the
Data Format setting from ASCII data
(default) to Tagged binary
communications protocol.