Epson Aculaser 2600 Series, Руководство пользователя

Страница: 247 / 473

Using the Control Panel
247
7
7
7
7
7
7
7
7
7
7
7
7
Selects the number of lines for the selected paper size and
orientation. This also causes a line spacing (VMI) change, and the
new VMI value is stored in the printer. This means that later
changes in the Page Size or Orientation settings cause changes in
the
Form
value, based on the stored VMI.
Source SymSet, Dest SymSet
Available only in certain locations where printers are sold with a
special ROM module installed to handle specific languages.
CR Function, LF Function
These functions are included for users of particular operating
systems, such as UNIX.
Tray Assign
Changes the assignment for the paper source select command.
When
4
is selected, the commands are set as compatible with the
HP LaserJet 4. When
4K
is selected, the commands are set as
compatible with the HP LaserJet 4000, 5000, and 8000. When
5S
is
selected, the commands are set as compatible with the HP LaserJet
5Si.
GL2 Menu
This menu lets you set the printer to emulate a plotter, allowing
you to use software which requires a plotter for output. The
LJ4GL2 mode is similar to the GL/2 mode supported in the HP
LaserJet 4 mode. The GLlike mode emulates some of the HP-GL
plotter commands and includes all the commands found in HP’s
GL/2 mode, as well as two additional commands.