Epson Aculaser 2600 Series, Руководство пользователя

Страница: 241 / 473

Using the Control Panel
241
7
7
7
7
7
7
7
7
7
7
7
7
Confidential Job Menu
This menu allows you to print or delete print jobs stored in the
printer’s Hard Disk Drive using the Confidential Job feature of
the printer driver’s Reserve Job function. You need to enter the
correct password to access this data. For instructions on using this
menu, see "Using the Confidential Job Menu" on page 279.
Parallel Menu
These settings control communication between the printer and
the computer when using the parallel interface.
* After this item is changed, the setting value takes effect after a warm boot
or after the power is turned on again. While it is reflected in the Status Sheet
and EJL read-back, the actual change takes effect after a warm boot or
after the power is turned on again.
Parallel I/F
Allows you to activate or deactivate the parallel interface.
Speed
Specifies the pulse width of the ACKNLG signal when receiving
data in the Compatibility mode or Nibble mode. When
Fast
is
selected, the pulse width is about 1 µs. When
Normal
is selected,
the pulse width is about 10 µs.
Bi-D
Item Settings (default in bold)
Parallel I/F* On , Off
Speed* Fast , Normal
Bi-D* Nibble, ECP , Off
Buffer Size* Normal , Maximum, Minimum