Epson ActionScanner II, Руководство пользователя

Страница: 91 / 130

Expression 636 Scanner Settings B-1
Appendix B
Expression 636 Scanner Settings
This appendix contains technical information about the various
image processing functions built into the Expression 636
scanner. All functions must be controlled from the scanner
software, and most functions can be combined with others to
produce a variety of effects.
The table below summarizes the scanner functions and the
settings available on your scanner. Each of them is explained in
the following pages. All of these functions are controlled from
your scanner software.
Scanner functions and settings
Function Available settings
Resolution 29 settings from 50 to 2400 dpi (hardware only)
Software interpolates to 4800
Scale 50% to 200% in 1% steps
Data format 1 to 8 bits/pixel/color
Captures up to 12 bits/pixel/color. When it captures
over 8 bits, it converts the information to
8 bits/pixel/color.
Color mode Color line sequence mode, color page sequence
mode and monochrome mode (dropout color
selectable)
Brightness 7 levels
Halftoning mode 3 modes and disabled
4 dither patterns
2 user-defined dither patterns
Gamma correction 5 settings for output devices plus 1 user-defined
Color correction 4 settings for output devices plus 1 user-defined