Epson ActionScanner II, Руководство пользователя

Страница: 107 / 130

Expression 636 Scanner Settings B-17
Note:
For color or grayscale images, ignore the dpi (dots per inch) of your
printing device. Even though your service bureau may use an
imagesetter with a 2400 dpi resolution, a scan resolution of only 150 to
350 dpi will produce the highest quality grayscale or color images the
imagesetter can print. Similarly, even though your laser printer may
have a 300 dpi resolution, a scan resolution of only 80 to 110 dpi gives
the best quality grayscale images it can print.
✔
Size or Scale
This is usually expressed as a percentage. If you want your
printed image to be larger than the original, increase its size with
this setting. If you are not sure how large you want the printed
image, choose the largest size you might use. You can reduce the
image size later with your software. (You can also increase the
size with your software, but you may lose some quality.)
Note:
The size of the image on your monitor will probably be different from the
size of the image when you print it.
✔
Halftoning and Dropout
For nearly all uses, None is the best setting for these. If you have
special needs that require halftoning at the time of scanning, see
the technical information on halftoning, dithering, and dropout
earlier in this appendix.
✔
Brightness
The minus numbers lighten the image, the plus numbers darken
the image. To lighten a dark original use -1 to -3, or to darken a
light original use +1 to +3. Usually you should leave this setting
at zero.