manualshive.com logo in svg

Epson ActionPrinter 2250, Руководство пользователя

Поделиться
Скачать
Epson ActionPrinter 2250 Скачать руководство пользователя страница 60

Using the Default-Setting Mode

Page length

This option is available only when you use continuous paper
with the push tractor. You can set the page length to 8.5, 11,

12, 

or 70/6 (A4) inches.

TOF (top-of-form) position

Whenever you press the 

LF/FF 

button or send the form feed

command, the printer loads paper to the top-of-form (TOF) position.
The TOF position is factory set to the ±0 position (8.5 mm - 0.33
inch - from the top edge of paper). You can set this position from
- 3 to +3 in l-mm (0.04-inch) increments.

Maintenance and Transportation

Cleaning the printer

To keep your printer operating at its best, you should clean it
thoroughly several times a year.

1.

Make sure the printer is turned off. Remove any paper as well as
the paper cassette and output guide.

2.

Use a soft brush to carefully brush away all dust and dirt.

3.

If the outer case or paper cassette is dirty or dusty, clean it with
a soft, clean cloth dampened with mild detergent. Keep the
printer cover in place to prevent water from getting inside the
printer.

3-16

Using the Printer

Содержание ActionPrinter 2250











































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды