Epson ActionDesk 4000, Руководство пользователя, Страница: 53 / 163

Note
If you want to delete your password, you must run the
SETUP program and follow the Istructions for deleting a
password in Chapter 2.
If you do not remember your password, see “Password
Problems” in Chapter 6.
Changing the Processor Speed
Your computer’s processor can operate at two speeds: fast (the
speed of your microprocessor) or slow (8 MHz). The slow
speed is available to provide compatibility with older
application programs.
When your computer is operating at fast speed, the
SPEED
light
on the front panel is on. When the computer is operating at
slow speed, the light is off.
You should use fast speed for almost everything you do
because your programs will work faster. However, certain
application programs have specific timing requirements and
can run only at the slower speed. See your software manual to
determine if this is the case.
Some copy-protected programs require the computer to run at
slow speed while accessing the program on a diskette. These
programs also usually require you to leave a key disk-the
diskette that contains the copy protection-in the diskette
drive. If you use a copy-protected program, you can change the
speed to slow to access the diskette and return it to fast speed
when you are finished.
3-8 Using Your Computer