Epson ActionDesk 4000, Руководство пользователя, Страница: 32 / 163

When you boot your system, the system BIOS updates the
memory size automatically. You see the memory configuration
displayed in the System Memory and
Extended Memory
fields on this SETUP screen.
You
cannot
change these values; if they are not
what you
expect them to be, check your jumper settings. Also, check that
the SIMM(s) are securely seated in their sockets. (See
Chapter 4.)
Setting the diskette drive(s)
On your system, diskette drive A is the 3.5-inch, highdensity
drive installed in the lower drive bay. You may also have
another drive of a different size or capacity; this is drive B.
Check the settings for both drives and correct them if necessary.
Assigning Hard Disk Drive Types
The
Fixed
Disk
Setup option
defines the types of hard
disk drives you have installed in your system. When you select
this option, you see the Fixed Disk Setup screen. From this
screen, select
Fixed Disk 0
Control or
Fixed Disk
1
Control.
Your computer comes with a hard disk auto-sensing feature.
Press Enter when the Autotype
Fixed Disk
option is
highlighted. The system detects the type of hard disk drive and
fills in the remaining fields
on the screen.
If you are using an older drive or a preformatted drive, it may
not support the auto-sensing feature. If you press
Enter when
the Autotype Fixed
Disk
option is highlighted and the
drive parameters do not match your drive, check Appendix A
to see if your drive’s parameters are included in the hard disk
drive table. If not, you need to define your own drive type or
reformat the disk. See the next section for instructions on how
to define your own drive type.
Running SETUP and Installing Drivers
2-5