Epson Action Laser Action Laser, Руководство пользователя

Страница: 70 / 219

Using SelecType
Interface submenu
To enter the interface submenu from the main menu, follow the
steps below:
1.
2.
3.
4.
5.
6.
Press
the
or button until you see
the
I/F function in the
display.
Press the
SET
button to activate the menu option. (The option
starts blinking, indicating that it
has
been activated.)
If
the
I/F function
is set to the PARALLEL
option, press the
button to select
the SERIAL
option.
Press the
SET
button to set the
SERIAL
option. An asterisk (*)
appears next to
SERIAL.
I / F = S E R I A L *
Press the
SET
button a third time to enter the interface submenu,
where you can
change
options for
the
menu functions listed
below. (The SelecType Options section in this chapter describes
options for these functions in detail.)
BAUD RATE
PROT
DATA BIT
PARITY
STOP BIT
ROBUST-XON
Use the or button to move to a function you want to
change.
Note: This submenu does not work in a loop. Pressing the A
button when BAUD
RATE
is displayed or pressing
the
button
when ROBUST-XON
is displayed causes you to exit
the
submenu and return to the main menu.
3-16 Using the Printer