Epson 826W - PowerLite WXGA LCD Projector, Руководство пользователя

Страница: 61 / 175

Using the Projector on a Network
61
7. If you want to create a password for remote access to the
projector, highlight
Web Control Password
, press
Enter
, and
enter a password of up to 8 alphanumeric characters. When you’re
done, highlight
Finish
and press
Enter
.
8. If you want to set up a security keyword so that only people who
are in the same room as the projector can access it, turn
Projector
keyword
on. Then when you want to connect to the projector, it
displays a randomized four-digit number or “keyword” on the
screen. If you’re using EMP NS Connection, you can enter the
keyword on your computer to connect (see the
EasyMP Operation
Guide for details).
9. When you’re done making these settings, highlight the
Return
button at the top of the screen, then press
Enter
. Choose
Complete
and press
Enter
, then choose
Yes
and press
Enter
to
save your settings.
Configuring the Connection
You can use NS Connection to connect to the projector and send
images wirelessly in two modes: Ad Hoc mode or Access Point mode.
■
Ad Hoc mode (computer-to-computer mode) lets you connect
just one computer to the projector at a time; it’s easy to set up,
and the only equipment you need is a computer with a wireless
(802.11g, 802.11b, or 802.11a) network card or adapter, or a
Macintosh
® with an AirPort ® or AirPort Extreme card. When
you connect with this mode, any connection to other wireless
networks is broken; you can connect to the projector only.
■
Access Point mode (infrastructure mode) lets multiple computers
access the projector at the same time and easily trade off control
over the projector. To use Access Point mode, you need a wireless
(802.11g, 802.11b, or 802.11a) access point or an AirPort
Extreme (or AirPort) base station, and one or more computers
with wireless network cards or adapters.
Follow the instructions below for the mode you want to use.
note
Make sure you’ve installed
the NS Connection software
as described in the EasyMP
Operation Guide.
To connect to the projector
over a wireless network, your
computer must be running
Windows 2000, XP, or
Vista. Your Mac must be
running Mac OS X 10.3 to
10.5.
Access Point mode
(infrastructure mode) is
required to achieve transfer
speeds up to 54MB/sec on an
802.11g network. Ad Hoc
mode (computer-to-
computer mode) limits
network connections to
11MB/sec. This is a
standard specification of
802.11g networking.