Epson 7900p - PowerLite XGA LCD Projector, Руководство пользователя

Страница: 93 / 146

Managing the Projector from a Remote Computer
93
Monitoring Your Projectors
The EMP Monitor screen lets you monitor your projectors using the
Status, Video Source, and Error icons shown below. This lets you see
which projectors are currently being used, from which source (or port)
they are projecting an image, and if a problem occurs.
For detailed status information, select the projector in question and
click
View details
.
The following table explains the meaning of the status icons:
Status icons
(green) Projecting; no problems
(dark) Turned off; no problems
(green) Projecting; problems detected
(dark) Turned off; problems detected
Network error (for example, not connected to
network, or power cable disconnected).
You may also see this error if
Network OFF is
selected in Standby Mode (see page 75).
note
To monitor a projector
when it’s in standby mode
(plugged in but not turned
on), you must select
Network ON
as the
Standby Mode
setting in
the projector’s menu system
(see page 75).
You can monitor up to 64
projectors.
Remember that when
Standby Mode is set to
Network ON
, the exhaust
fan continues to operate
after the projector has cooled
down. This is normal.
Status icon Video Source
icon Error icon