Epson 7900p - PowerLite XGA LCD Projector, Руководство пользователя

Страница: 80 / 146

80
Fine-tuning the Projector
5. Select the screen(s) on which you want your image to appear:
■
Select
No-Signal Msg.
if you want to display your image
(instead of a blank screen) when there is no video signal
incoming from the currently selected source. Then select
Logo
.
■
Select
A/V Mute
if you want your image to appear when you
press the
A/V Mute
button. Then select
Logo
and press
Enter
.
6. To display the logo as the startup screen, select the
Setting
menu.
7. Select
No-Signal Msg.
and press
Enter
. Then select
Logo
and
press
Enter
.
8. Press
Esc
.
9. To display the logo as the background screen when the A/V Mute
button is press, select the
A/V Mute
and press
Enter
.
10. Select
Logo
and press
Enter
.
11. When you’re finished, press
Menu
to exit the menus.
Setting a Password
1. Press the
Freeze
button on the remote control for about 5
seconds until you see the Password Protect menu:
2. Select
Password
and press
Enter
. You see the message
Change
the password?
3. Select
Yes
and press
Enter
.
4. Hold down the
Num
key on the remote control and use the
numeric keypad to enter a 4-digit password.
note
If a password has already
been set, you see the
Password Protect Release
screen. See “Starting the
Projector with a Password”
on page 82.
Password Protect
ON : OFF
Password Timer
Power ON Protect
Set
[ / ] :Select [ ] :Set
Set 9999H
Timer
0H
Time-elapsed
User’s Logo Protect
Passward
ON : OFF
ON : OFF
:
[Menu] :Exit