Epson 7850p - PowerLite XGA LCD Projector, Руководство пользователя

Страница: 186 / 224

186
Solving Problems
Solving EasyManagement Problems
You don’t see your projector in the EMP Monitor window.
■ Make sure that you’ve connected the projector to the network and
configured it correctly; see page 142 for information about setting
up the projector for a wired network, or page 70 for information
about setting it up for a wireless network. Also, make sure you’ve
registered the projector with EMP Monitor. See page 144.
■ Make sure that Standby Mode in the projector’s Advanced 1
menu is set to
Network ON
.
■ If the computer you are using is running Windows XP or 2000,
you must be logged in as the Administrator.
■ Try restarting your computer.
You can’t connect to the projector using NS Connection.
■
Make sure you’ve installed the EPSON 802.11b card correctly in
the projector; see page 68 for instructions. If you have to reinstall
the card, restart NS Connection or the program will not be able to
detect the projector.
■
Make sure your projector and computer are configured correctly.
See page 70 (Ad Hoc mode) or page 77 (Access Point mode) or
details.
■
Make sure that you have sufficient wireless signal strength (above
50 per cent). If you have a Macintosh, check the AirPort icon on
the Macintosh menu bar. For Windows, see the documentation
for your computer’s wireless card or adapter for details.
■
Make sure you aren’t projecting one of the EasyMP configuration
screens. (You should see a message that the projector is ready to
connect.) If you have to exit a configuration screen, restart
NS Connection.
■
If the projector is configured for Access Point mode and you’re
using DHCP, allow a minute or two for your projector to appear.
Sometimes it takes the server a little while to pick up the IP
address.