Epson 755c - PowerLite XGA LCD Projector, Руководство пользователя

Страница: 38 / 198

38
Connecting to Computers, Cameras, and Other Equipment
Connecting to a Computer
You can connect the PowerLite projector to any computer that has a
standard video output (monitor) port, including desktop models,
PC notebook and notebook computers, Macintosh PowerBooks and
iBooks,
® and hand-held devices. To connect to the blue
Computer/
Component Video
port (standard VGA cable connection), see the
instructions below. After connecting to the computer, you may also
want to do one of the following:
■
Connect a USB cable so you can use the remote control as a
mouse; see page 40
■
Connect an audio cable to play computer audio; see page 47
Connecting to the Computer Port
You can connect to the blue
Computer/Component Video
port
using the VGA computer cable that came with the projector (the
monitor port on your computer must be a mini D-sub 15-pin port).
1. If you’re using the VGA computer cable, connect one end to the
projector’s blue
Computer/Component Video
port, and the
other end to your computer’s monitor port. Then go to step 3.
2. You can connect an optional stereo mini-jack audio cable to play
sound through the projector (see page 47), or connect a USB
cable to use the remote control as a mouse (see page 40).
note
If you connect a Windows-
based computer to the
projector, you may see a
New Hardware Wizard
saying your computer has
found a plug-and-play
monitor; if so, click
Cancel
.
note
For newer PowerBooks with
DVI connectors, see your
computer’s documentation
to see how to use a DVI to
VGA adapter (usually
included with the computer)
to connect to the VGA
computer port.
If you’re using an older
Macintosh and you can’t
connect the cable to your
computer, you may need to
use the Macintosh desktop
adapter, as shown on
page 39 (available from
Epson; see page 13).
caution
Don’t try to force a
connector to fit a port with a
different shape or number of
pins. You may damage the
port or connector.