Epson 710C - PowerLite UXGA LCD Projector, Дополнение к руководству пользователя

Страница: 52 / 124

Getting Started
9
Installing Batteries in the Remote
Control
The remote control operates the projector and lets you access its
setup menus. You can also run your presentation with the
remote and use it as a wireless mouse.
Follow these steps to install the
batteries:
1. Slide off the battery
compartment cover.
2. Insert the two AA batteries
included with the
projector as shown.
3. Replace the battery
compartment cover.
Positioning the Projector
Before you can set up the projector, you need to decide where
to place it. The location you choose depends on the size of the
audience (and room) and your presentation style.
■
Place the projector on a sturdy, level surface, between
3.5 and 45 feet from the screen.
■
Make sure the projector is within 10 feet of a grounded
electrical outlet or extension cord.
■
Place the computer and/or video source within 5 feet of the
projector.
■
Make sure the projector is perpendicular to the screen.
Otherwise, your image will be distorted.
caution
When replacing batteries,
take the following
precautions:
Do not mix old and new
batteries.
Replace batteries as soon as
they run out. If the batteries
leak, wipe away battery
fluid with a soft cloth. If
fluid gets on your hands,
wash them immediately.
Remove batteries if you will
not be using the remote for a
long period of time.