Epson 6100i - PowerLite XGA LCD Projector, Руководство пользователя

Страница: 34 / 132

34
Projecting
Adjusting the Image
Once you see your image, you need to make certain adjustments:
■
To focus or zoom your image, see below.
■ If the image is too high or too low, you can reposition it. See
page 35.
■
If the image isn’t square, see page 36.
■ If a computer image displays incorrectly, see page 38.
If you need to fine-tune the image and/or sound, see Chapter 4.
Focusing and Zooming Your Image
Open the lens access door, then do the following:
■
Use the
Focus
ring on the projector to sharpen the image.
■
Use the
Zoom
ring on the projector to reduce or enlarge the
image. Move the tab toward the
W
to increase the size, and
toward the
T
to decrease it.
If the image still isn’t large enough, you may need to move the
projector farther away from the screen. You can also use the
E-Zoom
buttons on the remote control to zoom in on a portion of the image.
See page 45 for instructions.
Zoom ring
Focus ring