Epson 5550C - PowerLite SVGA LCD Projector, Руководство пользователя, Страница: 109 / 178

4 • Using ELP Link III
96
Installing the ELP Link III Software
You can use the ELP Link III software on any Windows system, and
on Macintosh OS System 7.x and OS System 8.x.
Installing the Software for Windows
1. Turn on your computer and start Windows.
2. Close any open Windows applications and turn off any screen
savers.
3. Insert the Projector Software CD into your CD-ROM drive.
4. If you have Windows 95, 98, or NT, the installer program
should start automatically. Go to step 5. If it doesn’t, click Start,
then Run and type E:\SETUP (substitute the correct drive letter
for your CD-ROM drive if it is not E). Then click OK.
If you have Windows 3.x, open Program Manager and select
Run from the File menu. In the Run dialog box, type E:\SETUP
(substitute the correct drive letter for your CD-ROM drive if it
is not E), then click OK.
5. When you see the ELP Link III welcome screen, select the
language you want to use and click OK.
6. Select your projector model (ELP/EMP/PowerLite 5500 [or
7500] series) from the pull-down list and click Next.