Epson 5350 - EMP SVGA LCD Projector, Руководство пользователя

Страница: 30 / 182

1 • Setting Up the Projector
22
Connecting to a PC Desktop Computer
To connect the projector to your PC desktop computer, you need to:
❐
Connect the projector video cable and computer monitor cable
❐
Connect the mouse and/or serial cable (if you want to use the
remote control as a mouse or use the ELP Link IV software)
❐
Connect the audio cable (if you’ll be projecting with audio)
Follow the steps in each section for the cables you need to connect.
Before beginning, turn off the projector and computer if they are on.
Note: Computer configurations vary. See your computer manual for the
location of the ports needed to connect your projector.
1
A/C Power Inlet
Audio Out
Audio 1 In
Audio 2 In
Mouse/Com 1
Mouse/Com 2
Repeater
Computer Out
Computer 2
Computer 1
R/R-Y G/Y G Sync B/B-Y
HD/Sync VD
S-Video In
Composite Video In
L & R Audio In
Rear IR
Receiver
Computer 2 or BNC Video Switch