Epson 5350 - EMP SVGA LCD Projector, Руководство пользователя

Страница: 112 / 182

4 • Using ELP Link IV
104
Installing the Software for a Macintosh
Follow these steps to install the software for the Macintosh:
Note : You can not currently use the ELP Link IV software with a Power
Macintosh G3 or iMac. Check with your dealer for future support.
1. Insert the Projector Software CD into your CD-ROM drive.
2. Open the CD-ROM drive icon, if necessary.
3. Double-click the Installer icon.
4. You see a dialog box asking you to select a language for the
software. Select a language and click OK .
5. You see the Software License Agreement screen. Read the
agreement and click Accept .
6. You see the Program Install screen. Make sure ELP Link IV is
selected and, as necessary, Acrobat Reader , and then click OK .
7. You see the Folder to Install screen. Select the folder where you
want to install the software and click Install .
8. When the installation is finished, close the ELP Installation folder.
Note: If you ever select Unconnected and Execute from the Option
menu, always uncheck the setting before exiting ELP Link IV so the
program starts correctly the next time you use it.