Epson 1810p - PowerLite XGA LCD Projector, Руководство пользователя

Страница: 15 / 104

Displaying and Adjusting the Image
15
Ideally, you should place the projector directly in front of the center of
the screen, facing it toward the screen squarely. The base of the lens
should be at about the level of the bottom of the screen.
If you place the projector below screen level, you’ll have to tilt it up by
extending the front adjustable foot. This causes the image to become
“keystone” shaped, but you can correct the distortion (see page 22).
For instructions on installing the projector in a permanent location,
such as a theater or conference room, see page 87.
Turning On and Off the Projector
Turn on any connected computer or video equipment before starting
the projector so it can automatically detect and display the image
source. If you turn on the projector first, or have multiple pieces of
connected equipment, you may have to select the image source
manually (see page 18).
note
After positioning the
projector, you may want to
connect a Kensington
MicroSaver
® anti-theft
device to the lock port on the
projector. You can purchase
this from Epson; see
page 11
.
Screen
Projector