manualshive.com logo in svg

Epson 1010, Руководство пользователя, Страница: 43 / 279

Поделиться
Скачать
Epson 1010 Скачать руководство пользователя страница 43

Using Single Sheets

The standard width printer can accommodate single sheets with a
width of 7.2 inches (182 mm) to 10 inches (254 mm). The wide
carriage printer can accommodate single sheets with a width of

7.2 

inches (182 mm) to 14.3 inches (364 mm).

If you do most of your printing on single sheets, you may find it
more convenient to install the optional cut sheet feeder. This option
automatically inserts a new sheet and can hold up to 150 pages. For
more details, see Chapter 5.

Loading Paper

1.

Push the paper release lever back to the single sheet position.

2. Turn on the printer. (The green POWER light should come on.)

Note: 

Do not insert paper before turning on the printer.

2-4

Paper 

Handling

Содержание 1010
























































































































































































































































































Отзывы:

Нет отзывов