Epson 1010, Руководство пользователя, Страница: 19 / 279

Choosing a Place for the Printer
There are several important things to consider when selecting a
place to set up your printer. Keep the following in mind:
Place the printer on a flat, hard, stable surface. A soft surface,
such as a padded counter or carpeted area, will block the
ventilation slots and may cause overheating.
Place the printer close enough to the computer for the printer
cable to reach.
Leave adequate room around the printer to allow for easy printer
operation and maintenance, and for unrestricted flow of air
around the printer.
Use a grounded outlet; do not use an adapter plug.
Avoid locations that are subject to direct sunlight, excessive heat,
moisture, or dust.
Avoid electrical outlets controlled by wall switches or automatic
timers. Accidental interruption of power can wipe out
information in both your computer’s and printer’s memory.
Avoid using outlets that share a circuit with large motors or
electrical appliances; this could cause fluctuations in line voltage.
Keep the entire computer system away from potential sources of
electromagnetic interference such as loudspeakers or the base
units of cordless telephones.
Setting Up the Printer 1-5