Problem Solving
41
It sounds like the EPSON
1000 ICS is printing, but
nothing prints.
Make sure the print head nozzles are not clogged. To clean
the print head, see page 25.
Your EPSON 1000 ICS
makes noise when you turn
it on or after it has been
sitting for a while.
Your EPSON 1000 ICS is performing routine
maintenance.
Printing or copying is too
slow.
Make sure your system meets the requirements listed on
page 51. If you’re printing a high-resolution image, you
need more than the minimum requirements listed.
You may also need to:
■
Clear space on your hard disk or run a
defragmentation utility.
■
Close open applications that you’re not using.
■
Increase your system’s memory (RAM).
For the fastest printing, try the following:
■
Choose
Black
ink in your printer driver (see page 9)
or the B&W setting on the Copy control panel (see
page 4) if your document doesn’t include color.
■
In the printer software’s Advanced dialog box, turn
High Speed
on.
The margins are incorrect.
■
Make sure the paper settings in your printer software
are correct for your paper size. See the electronic
Reference Guide
instructions.
■
Check your software documentation for instructions
on selecting the correct margins for your paper size.
The margins must be within the printable area of the
page. See “Printer Specifications” in your electronic
Reference Guide
(as described on page 2) for more
information.
The printer prints blank
pages.
■
Make sure the paper settings in the printer software
are correct for your paper size. See your electronic
Reference Guide
as described on page 2.
■
The print head nozzles may need cleaning; see page 25
for instructions.
Содержание 1000 ICS
Страница 1: ...EPSON 1000 ICS Basics ...