Epson Stylus PRO 7000, Справочное руководство

Страница: 99 / 182

Paper Handling
4-15
Cutting the roll paper at other times
1. Press the Paper Feed button to position the paper in place
for cutting (marked with scissors).
2. Press the Paper Source button repeatedly until the Roll Auto
Cut light comes on.
3. Press the Cut/Eject button. The roll paper is cut.
Printing page lines
If you want to print continuously on roll paper first, then cut the
page yourself after you finish printing, use the Print Page Line
setting. To make the Print Page Line setting using the control
panel, see “SelecType Settings” on page 1-7. To use the printer
software, see “Using the Roll Paper Option” on page 2-17.
Using Cut Sheet Media
Loading cut sheet media longer than 483 mm (long edge
of Super A3/B size)
To load cut sheet media longer than 483 mm, follow the steps
below. To load thick paper (0.5 to 1.6 mm), see “Printing on thick
paper (0.5 to 1.6 mm)” on page 4-18.
c
Caution:
As much as possible, keep your fingers off the printable surface
of the media, as fingerprints may reduce printout quality.
1. Make sure that the printer is on and the roll paper cover is
closed.
2. Press the Paper Source button repeatedly until the Sheet
light comes on.