EPSOM E7102, Руководство пользователя, Страница: 1 / 11

Job No …………..
E7102 – 2 DRAWER BEDSIDE
Congratulations on your purchase of your
EPSOM 2 DRAWER BEDSIDE . The EPSOM Collection is
made in New Zealand from 100% New Zealand made MDF –an environmentally sound renewable
resource.
If you require any parts or assembly advice or have any questions please go to
www.warehousefurniture.co.nz or call us on 0800 100 858.
WHERE TO ASSEMBLE YOUR BEDSIDE
Assemble your Bedside on a clean and smooth surface, free of anything which may damage the
laminate surface. A carpeted floor is ideal. If assembling on a workbench or table we suggest you
cover it with the carton the Bedside was packaged in.
Warning ! Never leave hardware parts where children can reach them. Small parts may be a choking
hazard!
PARTS LIST
Please check you have all the parts before beginning to assembling your Bedside. The measurements
will help you identify each part. If any parts are missing or damaged please contact us directly. Do not
call the store you bought the cabinet from as they will be unable to help you. Note: You will find two
pieces of board fitted across the ends of the package. These are for packing purposes only and
are not part of the cabinet.
QTY PART MEASUREMENTS NOTES
1 Top 465 x 396 x 25mm Black laminate on one side.
1 LH End 517 x 372 x 15mm Black laminate on both sides.
1 RH End 517 x 372 x 15mm Black laminate on both sides.
1 Top Drawer Front 413 x 195 x 15mm Black laminate on one side.
1 Bottom Drawer Front 413 x 235 x 15mm Black laminate on one side.
1 Front Toeboard 419 x 80 x 15mm Black laminate on front side only.
1 Rear Toeboard 419 x 80 x 15mm Plain
2 LH Drawer Sides 340 x 160 x 12mm Plain
2 RH Drawer Sides 340 x 160 x 12mm Plain
2 Drawer Backs 369 x 155 x 12mm Plain
2 Drawer Bottoms 379 x 339 x 4mm Plain
1 Back Panel 462 x 439 x 4mm Plain
EPSOM
collection