Clack CI Cabinet
Installation
Manual
Страница 1: ...Clack CI Cabinet Installation Manual ...
Страница 2: ...plied to connect the quick connect fittings Please observe the local regulations concerning the installation of your system Check that you have allowed space for access to the unit for possible future maintenance This installation may require plumbing work and will require an electrical outlet to be fitted near the system Only attempt this installation if you have been trained on the installation ...
Страница 3: ...nd ready to offer softenerd water Programming your Water Softener To connect the power cable you need to firstly remove the cover then remove the drive bracket assembly by pressing up on the drive brackets release tabs and pulling towards you Fig 1 Feed the cable trough the back plate Fig 2 and connect to PC board Fig 3 Its important that the bracket is reapplied with a loud snap to ensure the gea...
Страница 4: ...rking pressure 1 7 bar 1 7 bar 1 7 bar 1 7 bar Service flow rate 10 ltr min 10 ltr min 15 ltr min 23 ltr min Pressure drop at service flow 0 2 bar 0 2 bar 0 35 bar 0 55 bar Resin Volume 5 litres 8 litres 20 litres 30 litres Minimum supply flow rate 5 ltr min 8 ltr min 8 ltr min 8 ltr min Salt use per regeneration 0 75 kgs 1 2 kgs 3 0 kgs 4 5 kgs Inlet Outlet Drain connections BSPM BSPM BSPM BSPM O...
