Page 6
EPS Stromversorgung GmbH
Alter Postweg 101 • 86159 Augsburg
Germany
Fon: +49 821 / 570451-0
Fax: +49 821 / 570451-25
www.eps-germany.de
PSI 9000 2U Series
1.4
Disposal of equipment
A piece of equipment which is intended for disposal must, according to European laws and regulations (ElektroG,
WEEE) be returned to the manufacturer for scrapping, unless the person operating the piece of equipment or an-
other, delegated person is conducting the disposal. Our equipment falls under these regulations and is accordingly
marked with the following symbol:
1.5
Product key
Decoding of the product description on the label, using an example:
PSI 9 080 - 40 2U zzz
Field for identification of installed options and/or special models
S01...S0x
= Special version
HS
= High Speed option installed
3W
= Option 3W installed (GPIB port instead of interface slot)
Construction (not always given)
2U
= 19" rack enclosure with 2U of height
Maximum current of the device in Ampere
Maximum voltage of the device in Volt
Series :
8
= Series 8000 or 800,
9
= Series 9000
Type identification:
PSI
= Power Supply Intelligent, always programmable
Special models are always derived from standard models and can vary in input voltage and
current from those given.
1.6
Intended usage
The equipment is intended to be used, if a power supply or battery charger, only as a variable voltage and current
source, or, if an electronic load, only as a variable current sink.
Typical application for a power supply is DC supply to any relevant user, for a battery charger the charging of vari-
ous battery types and for electronic loads the replacement of an ohmic resistor by an adjustable DC current sink
in order to load relevant voltage and current sources of any type.
•
Claims of any sort due to damage caused by non-intended usage will not be accepted.
•
All damage caused by non-intended usage is solely the responsibility of the operator.
