17
English
3.4 Preference Settings
It is recommended to refer the steps below to set the displaying preference before
operating the dual remote control
Preference Settings Process
LCD Displaying
Step1: In power-on state, long press the
Menu button to enter the Port or Star-
board Side Setting page, and press Select
button the select Port or Starboard Side.
Then press Confirm button to enter the
Setting page.
Port Side
Starboard Side
Step2: Press the Select button to switch
to "UnitSetting". Press the Confirm button
to enter the unit setting page.
Port Side
Dock Power Limit
Unit Setting
Battery Setting
Step3: Press the Select button to choose
the unit you want to display.
"Battery" is the battery power and voltage
display selection. "Distance Unit" is the
choice of distance unit; "Speed Unit" is
the choice of speed unit.
Through the Select button, select the unit
to be displayed, and press the Confirm
button to confirm. White text on a black
background is selected. Press the Menu
button to return to previous setting page.
Port Side
Battery:
Speed Unit:
Distance Unit:
SOC
Volt
MPH
MILE
KM
/
H
KM
KNOTS
NM
