Stand 02.01.09, GB 32, Geared head drill
Page 31 of 54
4.5
Adjust driving speed
Always choose the correct driving speed for your work part/ tool.
At first, adjust the desired Step and direction for the motor at the driving speed
choice switch.
Switch position
Motor step
Turning direction
1
low
right
2
high
right
R (left)
low
left
R (right)
high
left
At the gear box are at the right above 2 choice levers. The left lever (area D
– 0 –
E) is for the abrasive value, the right lever (area A
– B – C) the fine value (view
overview control elements mechanical).
The adjustment of a driving speed only may happen during stoppage.
4.6
Adjust feed
Always choose the correct infeed for your work part and tool.
At the gear box at the right middle you can find the feed choice lever. Dependent
from the machine type, this lever has 3 or 4 steps (view table 2.2
4.7
Adjust depth arrester
Below the control panel in the housing body the adjustable screw of the depth
arrester is located. Adjust the depth arrester at the desired value by dint of the
scale. Through this adjustment you receive at serial bores with feed always the
same bore depth or by threading a defined changeover point of the die.
4.8
Drilling depth display
At the right of the control panel and below you find the depth display.
Choice lever for depth arrester at the right side of the housing body.
Picture 7: Drilling depth scale
Содержание GB 32
