background image

 

 

 Introduction 1-1

Chapter 1

Introduction

The P55-KV

 mainboard is a high performance system hardware based on

Intel Pentium  processor and is equipped with two PCI slots, three standard
ISA slots, Super Multi-I/O controller and dual port PCI-IDE connectors for
the future expansion. The hardware dimension is 220mm x 190mm with a
four-layer-design technology.

Specification

VIA VT82C580VPX PCIset chipset.

Intel 

Pentium

  Processor, AMD K5 & Cyrix M1 operating at 

75 ~ 200 MHz

and 

P55C

 with 

321 ZIF socket 7

 and scalability to accept faster  Processors

in the future.

Supports  up to 128 MegaBytes of DRAM (a minimum of 4 MB) on board

(72 Pins SIMM x 2).  BIOS will autometically detect and configure FP DRAM
and EDO DRAM (Refer to Chapter  2-4 System Memory Configuration).

Supports Onboard Pipelined Burst (synchronous) L2 

Write Back

 Cache.

The cache memory combination can be 256KB/512KB (32KB*32, 64KB*32
SRAM, respectively).

Supports three 16 bit ISA slots, two 32 bit PCI slots, and provides two

independent high performance PCI IDE interfaces capable of supporting

PIO Mode 3 and Mode 4

 devices. The 

P55-KV

 supports two PCI Bus

Masters and a jumperless PCI INT# control scheme which reduces configu-
ration confusion  when plugging in PCI I/O controller card(s).

Supports 

ATAPI

 (e.g. 

CD-ROM

) devices on both IDE interfaces.

         Supports 1 floppy port, 1 parallel port (EPP,ECP port), and 2 serial ports

(16550 Fast UART compatible).

 

     Supports a 

PS/2

 style mouse and standard AT style keyboard connectors.

      Supports Award Plug & Play BIOS . The BIOS is stored in Flash EPROM

form. It provides better upgradeability for the system.

       Supports CPU Hardware sleep and SMM (System Management Mode).

P55-KV

 utilizes Lithium battery which provides environmental protection

and longer battery life.

R

R

Содержание P55-KV





































Отзывы: