Epomaker Akko World Tour Manual
Version 1.2
When your keyboard is connected to your iPhone, it should show as “Connected”. You should
be able to type on it normally. You might get the keyboard assistant pop up, please go through it
so the keyboard can be recognised.
Macro Creation
Firstly, some notes to consider. The Esc, Fn and Left Windows key can not be re-binded for a
macro.This is because it is used in the macro creation. Also, it does not offer simultaneous
execution of the macros. If you press two macros, it will execute the first macro and then the
second macro. You also can not adjust the time between the execution of different macros.
If you want to clear your macros, you just need to long press
FN + The Key
to clear the macro
after you enter the macro editor by pressing
FN + ESC
.
In this case, we will get the key “A” to program “abc”.
1. Long Press
FN + Left Windows Key
to enter macro mode for 3 seconds. If you restart
your keyboard or disconnect it, it will exit macro mode.
2. Press
FN + ESC
to begin recording your macro.
3. Press
FN + The Key
you want to bind the macro to, in this case we want to bind to the
“A” key, so we will press FN + A.
4. Press whatever you would like the macro to type out when you press it. In this case, we
type “abc”.
5. Press
FN + The Key
you want to finish the sequence.
6. Press
FN + ESC
and long press
FN + Left Windows Key
to exit the macro editor to the
default mode..
15
