Epiroc RD 100, Инструкция по безопасности и эксплуатации

Страница: 19 / 32

Safety and operating instructions
© Construction Tools PC AB | 98001365 01 | 2020-09-24
Original Instructions
19
2. Press the throttle lever (A) to decrease the throttle
and for stopping the machine.
6.2.3 Throttle lever (RD 100 RB)
A
Adjust the throttle by using the throttle lever as follows:
1. Turn throttle lever (A) upwards to start and increase
the throttle.
2. Turn the throttle lever (A) downwards to decrease the
throttle and for stopping the machine.
6.2.4 Twist handle
B
C
A
Adjust the pusher leg by using the twist handle as fol-
lows:
1. Make sure that the twist handle is in neutral position
(A) when starting the power pack.
2. Turn the twist handle forwards(B) to extract the
pusher leg.
3. Turn the twist handle backwards(C) to retract the
pusher leg.
For roof bolting version, the twist handle is regulated in
Pusher leg
6.3 Start and stop
6.3.1 Drilling
n
Use protective shoes, gloves, helmet, ear protectors
and impact resistant eye protection with side protec-
tion.
n
Stand firmly and always hold the machine with both
hands. Hold one hand on the twist handle (A) and the
other on the front support handle (C).
n
Hold the inserted tool firmly against the work surface
before starting the machine.
6.3.2 Starting the rock drill
B
A
C
1. Check that the drill steel and drill bit are in good con-
dition and properly attached to the rock drill.
2. Check that the tool retainer is locked, so that the drill
steel does not fall out.
3. Start the power source.
4. Adjust the twist handle (A) to give a suitable feed
force for collaring the hole.