Epiroc RD 100, Инструкция по безопасности и эксплуатации

Страница: 14 / 32

Safety and operating instructions
14 © Construction Tools PC AB | 98001365 01 | 2020-09-24
Original Instructions
4.3.2 Labels on the accumulator
2
N
The accumulator must only be charged with Nitrogen.
NOTICE Only certified personnel are allowed to work
with the accumulator.
4.3.3 Safety label
To avoid injury, before using or servicing tool, read and
understand separately provided safety instructions.
4.4 Guarantee
The guarantee or product liability will be invalidated by
the following:
• Use other than intended
• Maintenance work not being carried out or being
carried out incorrectly
• The use of the wrong consumables
• The use of non-approved parts
• Damage due to wear
• Special applications without the required safety facil-
ities
• Damage due to improper storage
• Changes not carried out by or in consultation with
the manufacturer
5 Installation
WARNING Whipping hose
Hoses under pressure can whip uncontrollably if the
hose connection becomes loose. A whipping hose can
cause severe injuries. To reduce this risk:
u
Turn of the power pack before loosening the connec-
tion of a hose.
u
Check that the hose and the connections are not
damaged.
u Never carry or drag the machine by the hoses.
5.1 Hoses and connections
C
D
E
A
B
A. Power pack, PP 100.
B. Maximum 30 meter (98 ft) hydraulic hose between
the power pack and the rock drill.
C. Water hose connected to the power pack.
D. Oil pressure line.
E. Oil return line.
n
Check that the correct recommended operating pres-
sure is used, 120 bar (1,740 psi).
n
Wipe all couplings clean before connecting to the ma-
chine.
n
Check that the rock drill is in stop mode before start-
ing the power pack.
5.2 Hoses
The hydraulic hose must be approved for a working
pressure of at least 240 bar (3,480 psi), for connection to
the machine.