Recording
78
VGA Grid User Guide
Figure 60 Configure a FTP Client
To configure the FTP client:
1.
Select
FTP Client
in the
Protocol
field.
2.
Enter the
Server port
if the FTP server uses a non-standard port. The
standard FTP port is TCP 21.
3.
Enter the
Server IP address
.
4.
Enter the
Login
and
Password
required to authenticate with the FTP server
to connect to the server.
5.
Select
Apply
.
The VGA Grid will then attempt to connect to the FTP server. The Web admin
interface displays messages about whether the VGA Grid is able to connect to the
FTP server and the status of the connection.
9.11.5
Testing the Automatic File Upload
Test the automatic file upload to ensure all settings are correct.
To test automatic file upload:
1.
Confirm that the upload server is operating.
2.
Start recording a broadcast.
3.
Log into the Web admin interface.
4.
Select
Automatic File Upload
, from the main menu.
5.
Set the
How Often
setting to
On file rotation
. The cu
rrently rec
ording file
will be closed and saved.
Содержание VGA Grid
