Recording
76
VGA Grid User Guide
Figure 58 Configuring a CIFS Client
To configure the CIFS client:
1.
Select
CIFS Client
in the
Protocol
field.
2.
Enter the
Server port
if the CIFS server uses a non-standard port. If your
CIFS server uses standard ports you should not have to add any information
to this field. If your server uses non-standard ports or looks for a non-
standard port first, enter the port number in this field.
3.
Enter the
Server address
. This can be the numeric IP address or fully
qualified domain name of the CIFS server.
4.
Enter
Server share
. This is the CIFS share name or the name of the
Windows shared folder on the CIFS server.
5.
If required, enter the name of the CIFS
Domain
. The Domain can be a
Windows Domain or Work Group name.
6.
Enter the
Login
and
Password
required to authenticate with the CIFS server
to connect to the server share.
7.
Select
Apply
.
The VGA Grid will then attempt to connect to the CIFS server. The Web admin
interface displays messages about whether the System is able to connect to the CIFS
server and the status of the connection.
9.11.3
Configuring the RSync Client
Use the RSync client configuration to have the System act as an RSync client
connecting to an RSync server. Different networks may have different Rsync server
Содержание VGA Grid
