Streaming
44
VGA Grid User Guide
2.
In the RTP/UDP stream section specify the following additional fields
(refer to the Figure 28 RTP/UDP settings in Stream Setup):
Table 12 RTP Multicast Specific Configurations
Enable RTP/UDP stream
Select this checkbox to enable RTP/UDP streaming.
Destination IP
Enter the IP address of the target host.
Audio Port
Configure the audio port for the stream.
Video Port
Configure the video port for the stream.
3.
An SDP file is now generated. It is available in the
Info
section of the Web
Admin interface. Select a name and location for the SDP file and save it.
Then pass the SDP file to your audience.
Figure 29 RTP/UDP Settings in Publish Stream
8.2.2
Setting up an RTP Multicast from Publish Stream
Alternatively, you can set up an RTP Multicast from the Publish Stream functionality:
1.
Click the channels’ Stream Setup menu item.
2.
Select the RTSP stream type in the Stream Type field and click Apply.
3.
Click Publish Stream menu item.
4.
Select
RTP/UDP Push
from the drop-down list.
5.
Select the
Enable RTP/UDP stream
check box.
Содержание VGA Grid
