Signal Capture
25
VGA Grid User Guide
To make an adjustment, add a value to one or more fields and select
Apply
.
To clear any adjustments, delete the value from one or more fields and select
Apply
.
Figure 14 Digital Source Setup
The following settings can be made for the digital source:
Table 7 Settings available on the frame grabber page
Use signal from
Specify the signal captured by the frame grabber
Autoadjustments interval
Change the interval between automatic adjustments
if you want them to occur more or less often. To
suspend automatic adjustments, enter 0.
Vertical shift
Configure the vertical shift to offset the captured
image’s position. For example, a captured image that
is shifted slightly downward or vertically can be
corrected with minor adjustments to the vertical shift
settings.
Increasing or decreasing the value entered in the
Vertical Shift field shifts the image up or down.
Horizontal shift
Configure the horizontal shift to offset the captured
Содержание VGA Grid
