epiphan Pearl Mini, Руководство пользователя

Страница: 154 / 447

Pearl Mini User Guide Reassign a registered resource
3. Change the Resource name and click Apply .
Reassign a registered resource
Every encoder you register with Kaltura has a unique resource name. To swap out one Pearl Mini encoder with
another one, you can simply reassign the existing Pearl Mini resource name to the replacement Pearl Mini.
Assigning Pearl Mini the same resource name when you register the encoder transfers all the existing
schedules and recordings over to the replacement Pearl Mini. When a resource tries to register using the same
name as another device, a warning message appears and you're asked whether or not you want to take over
from the other resource.
l
If there's only one other registered resource with that name, you're prompted to choose whether or
not to take over the events for that other resource. If you do take them over, Kaltura transfers all
scheduled events from that other device.
l
If more than two other resources are already registered with the same resource name in Kaltura,
registration fails. You're prompted to choose a different resource name and to try registering Pearl Mini
again.
This works well when you want to change the encoder in a room but retain all the existing schedules and
recordings that are associated with the encoder for that room.
Alternatively, you can avoid having to register the replacement Pearl Mini with Kaltura. If you apply a
configuration preset to set up the replacement Pearl Mini with the settings from the currently registered Pearl
Mini, the replacement Pearl Mini assumes the identity of the registered resource. For more information about
configuration presets, see
About configuration presets .
Using a configuration preset can result in two Pearl Mini resources with the same identity, which
can effect recording and the content that's uploaded to Kaltura for scheduled events. Power
142