epiphan Networked VGA Grid, Руководство пользователя

Страница: 358 / 387

Networked VGA Grid User
Guide
Configuration keys for third party APIs
Key Values Description
offset 0...63
Specifies ADC offset.
0 is brightest, 63 is darkest.
phase 0...31
Specifies phase adjustments for VGA signals. Generally not
used unless value is provided by Epiphan support.
pll -999...999
Specifies PLL adjustment.
Changes the number of pixels in the line.
tune_interval 0...9999
Specifies the number of seconds between auto-adjustments.
To disable auto-adjustments, set to 0.
vshift -20...20
Specifies vertical shift.
For shifts up, use positive values.
For shifts down, use negative values.
Broadcast configuration keys
The following settings for streaming to viewers (broadcasting) are supported, including stream access control
settings.
Table 58 Supported Broadcast configuration keys
Key Values Description
bcast_disabled
on
empty string ("")
Enables or disables the broadcast.
To disable broadcast, set to on.
To enable broadcast, set to empty string ("").
rtsp_port
1000...65535,
but not 5557 Specifies the port for RTSP streaming. Note port 5557 is used
for network discovery and cannot be used for streaming.
streamport
1000...65535,
but not 5557 Specifies the port used for streaming. Note port 5557 is used
for network discovery and cannot be used for streaming.
ac_override
on
empty string ("")
Overrides the global stream access settings or uses global
stream access settings.
To use global stream access settings, set to empty string ("").
To override global stream access settings and use local viewer
access permtions, set to on.
ac_viewerpwd string Specifies the password for Viewers.
358