epiphan Networked VGA Grid, Руководство пользователя

Страница: 187 / 387

Networked VGA Grid User Guide Rename a source
4. From the Admin panel, select your desired source under the Source header; the source configuration
page opens.
5. Select a “No signal” image. This image displays in the channel when the source's signal is not detected.
(If your uploaded image does not appear in the list, ensure it doesn't exceed the maximum file size of
3840×2160.)
Alternatively, to select an image you can simply drag and drop your chosen picture file to the blank
space below the Image field.
6. In the Timeout field, enter the number of seconds before the "No signal" image is displayed. If no
manual value is entered, the default time to display is 5 seconds.
7. Click Apply .
8. Test that the No Signal image is correctly applied by disconnecting your source and previewing the
channel(s) containing said source. See Preview a channel for more information.
Rename a source
For local custom channels, source names are used when adding sources to channels, therefore it is important
that you know the name of the source you wish to use. If a channel has only one source, the channel name
will by default be the same as its source name and will update automatically when the source name changes.
Sometimes it's helpful to configure the source name to match the data it's capturing so it's clear what the
channel is capturing too. Alternately you can change the channel's name. See
Rename a channel .
To change a source name:
1. Login to the Admin panel as admin . See Connect to the Admin panel .
3. From the Admin panel, scroll to the Sources menu option.
187